Saturday, June 27, 2009

Insights Into Magic Card Doll Making, Part 2

Welcome back to part 2 of documenting Lia.

Figure 1: Finished legs
Figure 2: Hip structure

Lia at this stage sported Rev. B hips. Rev. A was too loose and was enclosed so any maintenance was destructive. I eventually changed her design to Rev. C which sported an open socket system with the opening parallel to her hip connector, which allows me to pop the ball joint out easily for repair. The rods are made with a bamboo stick used for barbecues. Approximate diameter is 1/8". These were bought specifically for use for building Hotaru and have lasted me to this current date.
Figure 3: Rear view of Lia's skeleton

Lia at this stage has her hip completed.

Figure 4: End caps for limb joints

I used the cone frustum maker to build these caps. The washer for the screws are glued down to the card face, and the nut is expoxied onto the washer so I have a false permanent thread to anchor the screws in. This allows me to adjust the tightness of her joints and easily change components.
Figure 5: Completed torso.

The body gets a coating of printer paper and 110lb cardstock to get as best of a surface finish a piece of sandpaper can get. Which in this case, isn't much. Fortunately, Aelia doesn't suffer from surface defects like Lia and Hotaru due to a more aggressive sanding.

Figure 6: Initial foot contruction

Figure 7: Foot construction, end stages

I changed the foot from an epoxied mess to a proper construction that could actually be painted. The foot is made of tubes stacked together until the form was present. After the tubes were secure, I coated the entire foot with 110lb cardstock, sanded it down, and cut out some toes.

Figure 8: Photo op for current progress.
Figure 9: Detail of the torso
Figure 10: Components ready for painting

This stage, the parts have been rounded out. I used the technique outlined here for making the twig-like limbs not so thin. Now, I have implemented a better system where I first add the tub reinforcements, cover them with a sheet of Magic card, then coat it with 110lb cardstock. I then cover the seams with printer paper, sand them smooth, then get them ready for paint.

The head was built using an out of date system that I've now abandoned in favor for a more sculpted process using a Dremel to carve out facial details. The previous method can be found here. I'm now using this process to make doll heads.

Hands were constructed in the same manner depicted here for Aelia.

Development log:
6/25/2007: Initiated building the development unit, based off an Obitsu ball jointed doll structure.
7/12/2007: Completed exterior build of development unit, Revision None.
7/27/2007: Hotaru officially completed.
9/13/2007: Hip design moved from hinge swivel joints to ball joints. Entered Revision A.
6/10/2008 to 6/15/2008: Lia built and completed. Entered Revision B. Feet and shoulders changed.
June 2008: Hotaru and Lia upgraded hip structure to Revision C.
2/28/2009: Aelia project initiated. Body enters Revision D. Changed shoulder joint and chest assembly for structural strength and reliability. Body shaped to resemble BBI proportions.
6/6/2009: Aelia project completed.


That wraps up two years of doll making. (Amazing that it's only been two years since I started. A lot has changed in skill level since then. ) I hope this has been insightful into the level of work needed to produce a doll made from Magic: the Gathering cards. I don't expect anyone to be able to replicate my work or even do close to what I do. I hope that by showing you this process, you can use this for ideas of how to build your own creations.

A lot of the building techniques used in building Hotaru and Lia were critical in the construction of the Team Fortress 2 related things. The sentry gun and Sasha would not exist if it weren't for those two.

Insights Into Magic Card Doll Making

On June 15, 2008, I finished making Lia, my second foray into dolls made out of Magic: the Gathering cards. I've never actually detailed what has gone into creating a doll from scratch, but that week I had taken a good set of photographs. To commemorate her first year of service, I show you the process of converting a stack of Magic cards into a doll. I'll also be answering some common questions I've been asked.

For starters:
Why Magic: the Gathering cards?

I had a pile of junk cards I'd never see play. I was previously working with papercraft (paper modeling) and had the idea of seeing if Magic cards could be used as a building medium. I spent a month designing the Hotaru body base and the subsequent techniques that would propel me on this weird path.

How do you prepare the cards?
First, I determined by testing that the thinnest stack of cards I could use to make a solid joint was eight layers. Each card layer is sanded down to remove the finish, then laminated together with Elmer's glue. Cutting Magic cards is easier when they're in thicknesses of 4 or less. Any more and you need some special tools.
Where are the instructions?
Unfortunately, I do not have explicit instructions for my dolls or anything else I build. Scratchbuilding isn't something I can hope to tell you how to replicate exactly. I documented my plans, which are all I have to use. I used these along with my engineering development unit, Hotaru.

Anyways, off to explain the unexplainable.
Figure 1: Chest assembly, Rev. A

This assembly serves as the base for Hotaru and Lia. Aelia uses a new system, Rev C, which is a single tube system than a box with 1/4" holes cut into it. This component was built from the plans linked here and utilizes a layer thickness of 4. The arm support consists of two plates to support a 1/4" pin. The projected load was small, so two thin walls would work.

Figure 2: Fleshing out the chest

The chest has several freehanded cards cut to fit and fill out her chest. The shoulders are still flat on this stage. I use regular printer paper to hold down the Magic cards. Sanding the card down would make securing them easier.
Figure 3: The Waist Section

I fondly call this component the aircraft turbine engine. I used the handy cone frustum maker to build the waist. The component on the thread spool is the joint mechanism, made with two 10mm diameter ball joints. This fits into the aircraft turbine part on the 7UP pencil sharpener can.
Figure 4: Torso Assembly

This stage highlights the initial fit of the torso components. The ball joint rod ends feed into a 16 layer thick section of Magic cards. The waist section near the black binder clip is one of these 16 layer thick sections. Another is in the chest, covered by the lower plating. Here, I've already added shoulders and a few more layers of paper to the chest.

Figure 5: Side view of the torso.

Sixteen layers is a lot of card. I did this before I had a Dremel, so I had to cut each layer at a time. Never doing that again. The background was my cutting mat back in 2008, which was a folded up poster for Earth Day.

Figure 6: The hip.

I needed to make a 1/8" hole in the pelvis for the ball joint rod ends that would serve as her hip. This was done with a hole punch, one sheet at a time. Now, I'd drill a hole with a Dremel.

Figure 7: Pattern templates for arms.

The second time around, I made templates. This layer of card would contain one of three sets of patterns needed to build another doll.

Figure 8: Arm assembly, Rev B

One day later, and we have arms. I must have not done any studying that week. Arms were documented here. Process is unchanged from Rev. A to Rev. B. Change from Rev A to B included increased range of motion using a P shaped shoulder connector than a D shape.


Figure 9, 10, 11: The Upper Assembly.

I've started sculpting out her body at this point. The hollow areas get stuffed with 110lb cardstock cylinders to reinforce the volume. This part isn't in my documentation. I've only provided the skeletals, since the rest gets freehanded at this stage onwards.

Part 2: The Lower Half and Miscellaneous Details